341
Practical hints
Replacing bulbs
3 Dust cover
4 Bulb
왘 Remove dust cover 3.
왘 Press catch aside and pull out the bulb
socket with the bulb from side marker
lamp housing 2.
왘 Press gently onto bulb 4 and turn
counterclockwise out of its bulb
socket.
왘 Press new bulb 4 gently into the bulb
socket and turn clockwise until it
engages.
왘 Insert the bulb socket back into side
marker lamp housing 2.
왘 Reinstall dust cover 3.
왘 Reinstall side marker lamp housing 2.
왘 Install and tighten securing screws 1.
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following first:
왘 Turn the exterior lamp switch to
position M (
컄 page 110).
Tail lamp unit
i
Do not overtighten securing screws 1.
Otherwise side marker lamp
housing 2 could be damaged.
i
G55AMG:
Remove the protective grille before
replacing bulbs.
To Next Page
Loading...
Need help?
General
