• When a vehicle is detected in the blind spot monitoring range and the driver activates
the corresponding turn indicator, a double warning tone sounds once and the warning
light flashes.
Components of Blind Spot Assist:
• Four short-range sensors
• Indicating lights in the exterior mirrors
• Signaling equipment for the acoustic warning
Highbeam Assist (Code LA1)
Highbeam Assist is controlled by a camera behind the windscreen which continuously
monitors the area in front of the vehicle and the traffic situation ahead of the vehicle. When
the system does not detect any vehicles ahead or oncoming traffic in the reflection zone, high
beam is switched on automatically. Highbeam Assist is activated when the rotary light switch
is set to "AUTO" and the high beam function of the combination switch on the steering wheel
is switched on. Permanent deactivation is possible via the instrument cluster. Highbeam
Assist is active from a speed of 22mph and operates fully automatically. It is available both
for halogen and for bi-xenon headlamps.
Components of Highbeam Assist:
• Camera on the inside of the windscreen
• Electronic control unit
• Image-processing software
©2015 Mercedes-Benz USA, LLC / Daimler Vans USA, LLC
To Next Page
Loading...
Need help?
General
