Driver seat frame, low
Details & Technology
The standard driver's seat base frame (height approx. 305 mm [12”]) is replaced by a
version 85 mm lower (height approx. 220 mm[8.7”]).
Benefits & Arguments
• Allows a special driver's seat to be fitted
Basis for installation of a suspension seat or a
swiveling seat ex-factory (e.g. SR8 + SB1)
or by a body manufacturer (with or without SR8).
Remarks
If the seat is fitted by a body manufacturer, the Body/Equipment Mounting Directives
must be adhered to (e.g. H-point / seat height).
©2015 Mercedes-Benz USA, LLC / Daimler Vans USA, LLC
To Next Page
Loading...
Need help?
General
