Stabilizer, rear axle, reinforced
Details & Technology
The higher-capacity stabilizer has a larger diameter than the standard version. The stabilizer is
fitted behind the axle and attached at two points to the axle tube and at two points to the
frame. It is a torsion bar made of spring steel and is fitted transversely to the direction of
travel and parallel to the axle. It only exerts its stabilizing effect under unilateral compression.
If there is equal compression on both sides, the stabilizer has no effect.
Benefits & Arguments
• Reduces roll
The higher-capacity stabilizer has a more powerful stabilizing effect than the standard
version. It reduces roll which can occur for example when cornering with a load which has a
high center of gravity.
Remarks
Generally recommended on bodies with a high center of gravity.
This Code cannot be ordered individually.
©2015 Mercedes-Benz USA, LLC / Daimler Vans USA, LLC
To Next Page
Loading...
Need help?
General
