Stabilizer, reinforced at front axle
Details & Technology
A reinforced (larger-diameter) stabilizer is mounted to the control arms and axle housing. The
stabilizer is a torsion bar made of spring steel and is fitted transversely to the direction of
travel. The stabilizing effect is exerted only under one-sided compression. If there is equal
compression on both sides, the stabilizer has no effect.
Benefits & Arguments
• Improved roadholding even with an unequally distributed load
• Reduces roll
The reinforced stabilizer has a more powerful stabilizing effect than the standard version. It
reduces body roll, which occurs, for example, when cornering with a load that has a high
center of gravity or when the front axle load is distributed unequally.
Remarks
This stabilizer is recommended for camper vans and vehicles with a similarly high center of
gravity, for example, box-body vehicles with loading tailgates, vehicles with elevating
platforms or refrigerated box bodies.
This Code cannot be ordered individually.
©2015 Mercedes-Benz USA, LLC / Daimler Vans USA, LLC
To Next Page
Loading...
Need help?
General
