Third Brake Light Prep
Details & Technology
A wiring harness fitted with a white four-pin flat connector is laid in the base of the driver's
seat.
Two of the pins are wired, one with a brown ground cable with a cross-section of 1.5 mm and
one with a black and yellow cable with a cross-section of 0.55 mm.
Benefits & Arguments
• Easy connection of the third brake light by a body manufacturer
This pre-installation enables the body manufacturer to connect the third brake light easily
©2015 Mercedes-Benz USA, LLC / Daimler Vans USA, LLC
To Next Page
Loading...
Need help?
General
