Settings
108
You can alter the dishwasher’s
controls to suit changing requirements
by adjusting the settings.
Settings can be altered at any time.
Opening the Settings menu
Switch the dishwasher on with the
sensor if it is switched off.
Touch the Further programmes/
Settings sensor.
The first of the further programmes will
appear in the display.
Use the sensors to select the
Settings menu option and confirm
with OK.
The first option in the Settings menu will
appear in the display.
For further information about the
display functionality, see “Guide to the
appliance - Display functions”.
Changing settings
Use the sensors to select the
menu option you want to change and
confirm your selection with OK.
Submenu options that have already
been selected will have a tick
beside them.
Select the setting you want using the
sensors and confirm with OK.
To exit a submenu use the sensor.
The display will revert to the menu
above.
Closing the Settings menu
Touch the sensor.
The display will change to the menu.
To Next Page
Loading...
Need help?
General
