Settings
114
Reset
This menu option only appears if you
have already connected your
dishwasher to your Wi-Fi network
before.
You can use this menu option to reset
all Wi-Fi module settings to the factory
default settings.
The network configuration should be
reset whenever a dishwasher is being
disposed of or sold, or if a used
dishwasher is being put into operation.
This is the only way to ensure that all
personal data has been removed and a
previous owner will no longer be able to
access the dishwasher.
Select the Resetmenu option and
confirm with OK.
Remote control
This menu option will only be
displayed if you have connected your
dishwasher to your Wi-Fi network (see
“Settings - Miele@home”).
If you wish to permanently switch off
the Remote control option, you can do
this under this menu option. The
sensor will then no longer be
available to select until you change this
setting again.
Even if the Remote control option is
switched off, you can use the
Miele@mobile App to call up
information about your appliance.
However, you cannot start any
programmes or change any settings
from it.
To Next Page
Loading...
Need help?
General
