Cleaning and care
75
Cleaning the control panel
The control panel should only be
wiped with a damp cloth.
Cleaning the appliance front
Damage due to soiling.
Soiling that is left too long might
become impossible to remove and
could cause the external surfaces to
alter or discolour.
It is therefore best to remove any
soiling immediately.
Clean the front with a soft sponge
and a solution of warm water and a
little washing-up liquid. After
cleaning, wipe the front dry using a
soft cloth.
A clean, damp microfibre cloth (such
as the Original Miele all purpose
microfibre cloth) without detergent
can also be used.
To avoid damaging the external
surfaces, do not use the following:
- cleaning agents containing soda,
ammonia, acids or chlorides
- cleaning agents containing descaling
agents
- abrasive cleaning agents, e.g.
powder cleaners and cream cleaners
- solvent-based cleaning agents
- stainless steel cleaning agents
- dishwasher cleaners
- oven cleaners or sprays
- glass cleaning agents
- hard, abrasive brushes or sponges,
e.g. pot scourers, brushes, or
sponges which have been previously
used with abrasive cleaning agents
- dirt eraser sponges
- sharp metal scrapers
- steel wool or metal scourers
- steam cleaners
To Next Page
Loading...
Need help?
General
