Settings
38
Volume
Buzzer tones
If buzzers are switched on, a buzzer will
sound when the set temperature is
reached and at the end of a set time.
Melodies
At the end of a process, a melody will
sound several times in intervals.
The volume of the melody is
represented by a bar with seven
segments.
–
Maximum volume
–
Melody is switched off
Solo tone
At the end of a process, a continuous
tone will sound for a period of time.
The pitch of this continuous tone is
represented by a segment bar.
–
Maximum pitch
–
Minimum pitch
Keypad tone
The volume of the tone that sounds
each time you touch a sensor control is
represented by a bar with seven
segments.
–
Maximum volume
–
Tone is switched off
Welcome melody
The melody that sounds when you
touch the On/Off sensor control can
be switched on or off.
Units
Temperature
You can set the temperature in degrees
Celsius (°C) or degrees Fahrenheit (°F).
Booster
The Boosterfunction is used to quickly
pre-heat the oven compartment.
– On
The Booster function is automatically
switched on during the heating-up
phase of a cooking programme. The
top heat/grill element, ring heating
element and hot air fan pre-heat the
oven compartment to the set
temperature at the same time.
– Off
The Booster function is switched off
during the heating-up phase of a
cooking programme. Only the heating
elements for the selected oven
function are used to pre-heat the
oven compartment.