Problem solving guide
78
Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.
Problem Cause and remedy
The display is dark. You have selected theTime| Display| Off setting. When
the oven is switched off, the display is dark.
As soon as the oven is switched on, the main menu will
appear. If you want the time of day to be displayed
constantly, select theTime| Display| On setting.
There is no power to the oven.
Check whether the fuse has tripped. Contact a
qualified electrician or the Miele Customer Service
Department.
The buzzer does not
sound.
The buzzers are deactivated or set at too low a volume.
Switch on the buzzers or increase the volume with
the Volume| Buzzer tones setting.
The oven compartment
does not heat up.
Demo mode is active.
You can select menu options in the display and the
sensor controls, but the oven heating does not work.
Deactivate demo mode with the Showroom
programme| Demo mode| Off setting.
The sensor controls do
not respond.
You have selected theDisplay| QuickTouch| Off setting.
When the oven is switched off, the sensor controls do
not respond.
As soon as the oven is switched on, the sensor
controls will respond. If you want the sensor controls to
respond even when the oven is switched off, select the
Display| QuickTouch| On setting.
The oven is not connected to the power supply.
Check that the oven plug is correctly inserted into
the socket and switched on.
Check whether the fuse has tripped. Contact a
qualified electrician or the Miele Customer Service
Department.
There is a fault with the controls.
Touch and hold the On/Off button until the
display switches off and the oven restarts.