Miele PDR 914 User Manual

Before using for the first time
20
11:02
Cottons 
Cottons PRO
Label
Cottons
Minimum iron
Standard
Program packages
Woolens
Delicates
OK
 Swipe to the left until you reach a program that is not highlighted in
orange.
 Touch the program to be activated.
The selected program is now active highlighted in orange.
You can select further programs if required.
 If you do not want to select any more programs, confirm with OK.
The display will change to the next setting.
Tip: You can disable a selected program by touching the program
again. Exception: The Cottons  and Cottons PRO programs cannot
be disabled.
Setting up a payment system
If you wish to set up a payment system, read the “Payment system”
section of the “Supervisor level” chapter. These settings can only be
changed during the initial commissioning process. If you wish to
change the settings after the commissioning process, please contact
Miele Service.
If you do not wish to set up a payment system, you can skip this
stage.
Skipping payment
system setup
11:02Payment system
No payment
system
Program
control
Timed op. +
impul. counter
Timed
operation
KOM module
OK
 Touch the No payment systemsensor control.
 TapOK to confirm.
The display will change to the next setting.
Completing the initial commissioning process
The initial commissioning process is complete when a program lasting
longer than 10minutes has been carried out in full.

Miele PDR 914 Specifications

General

Brand	Miele
Model	PDR 914
Category	Dryer
Language	English