Supervisor level
41
Peak load prevention
- Factory default: Off
- On
Select KOM module
This tumble dryer is equipped with an integrated WiFi module. However, the tumble dryer
can also be equipped with an external module.
- Factory default:
Off
- Int. module Domestic
The internal WiFi module is used.
- Ext. module Professional
An XKM module is inserted into the module slot.
Availability of Miele digital products
The ability of Miele digital products depends on the availability of the services in your coun-
try.
The different services are not available in all countries.
For information about availability, please visit www.miele.com.
WiFi / LAN
Control the networking of your tumble dryer.
Networking of the tumble dryer for use with the digital Professional tools is only possible
with the external module. The internal module can only be used by Miele Customer Ser-
vice.
- Deactivate (visible when the network is activated)
The network remains set up; the WiFi function is switched off.
- Activate (visible when the network is deactivated)
The WiFi function is reactivated.
- Connection status (visible when the network is activated)
The following values are displayed:
– the quality of WiFi reception
– the network name
– the IP address
- Set up again (visible when set up)
Resets the WiFi login (network) to immediately re-establish a new connection.
- Reset (visible when set up)
The network is no longer set up. A new connection has to be established in order to use
the network again.
– The WiFi is switched off
– The WiFi connection will be reset to the factory default