Miele TCJ 690 WP User Manual

Operating the tumble dryer
19
f
Optical interface
For service technicians.
g
Sensor controls for Extras
You can select extra options to
augment the drying programmes.
When a drying programme is
selected, the sensor controls for the
possible Extras light up dimly.
h
 Sensor
You can use the  sensor to call up
an energy consumption forecast for
the selected drying programme.
See “Washing environmentally and
economically - EcoFeedback” for
more information.
i
 Sensor controls
The  sensor starts the Delay start
function. With Delay start you can
delay the start of a programme. The
start of the programme can be
delayed from 15minutes up to a
maximum of 24 hours. This allows
you to make use of night-time
economy electricity rates, for
example.
Further information can be found in
chapter 4 - Selecting programme
settings.
j
Start/Stop sensor
Touching the Start/Stop sensor
starts the selected programme or
cancels a programme that has
already started. The sensor flashes
slowly as soon as it is possible for a
programme to be started and then
lights up constantly after the
programme has started.
k
Programme selector
For selecting programmes and for
switching off the appliance. The
dryer is switched on by selecting a
programme, and switched off by
turning the programme selector to
the  position.
Operating the sensor controls
The sensor controls react to fingertip
contact. Selection is possible as long
as the respective sensor is illuminated.
If a sensor is brightly lit, this means:
currently selected
If a sensor is dimly lit, this means:
selection possible

Miele TCJ 690 WP Specifications

General

Brand	Miele
Model	TCJ 690 WP
Category	Dryer
Language	English