Miele TCJ 690 WP User Manual

Settings
89
RemoteUpdate
The RemoteUpdate function is used for
updating the software of your dryer.
The RemoteUpdate function is
deactivated as standard.
If you do not install a RemoteUpdate,
you can continue to use your dryer in
the usual way. However, Miele
recommends installing RemoteUpdates.
Activation
The RemoteUpdate menu option is
only displayed and can only be
selected if you have added your dryer
to your Wi-Fi network (see “Settings -
Miele@home”).
Miele’s RemoteUpdate function can
only be used if the tumble dryer is
connected to a Wi-Fi network and you
have an account in the Miele@mobile
App. The dryer must be registered in
the app.
See the Miele@mobile App for terms
and conditions of use.
Some software updates can only be
carried out by Miele Service.
Running a RemoteUpdate
If a RemoteUpdate is available for your
dryer, it will be displayed automatically
for you.
You can choose to start the
RemoteUpdate immediately or wait until
later. If you select “Start later”, the
prompt to run the RemoteUpdate will
be displayed again the next time you
switch on the dryer.
The RemoteUpdate can take several
minutes.
Please note the following information
about the RemoteUpdate function:
– You will only receive a message when
a RemoteUpdate is available.
– Once a RemoteUpdate has been
installed, it cannot be undone.
– Do not switch off the dryer during a
RemoteUpdate. Otherwise, the
RemoteUpdate will be aborted and
will not be installed.

Miele TCJ 690 WP Specifications

General

Brand	Miele
Model	TCJ 690 WP
Category	Dryer
Language	English