11
Package Contents
■ VBar Control Transmitter
■ Neck strap
■ USB lead
■ Wall charger
■ This manual
Particular features
of VBar Control Touch
VBar Control Touch sports a couple of particular features,
which make everyday use even more convenient.
You will notice that this manual only covers the basic
operation of VBar Control itself. The manual for each and
every setting, parameter and additional app is available di-
rectly on the radio, by means of a (?) button. This way, you
can consult the manual directly whenever necessary, and
even jump between settings or apps and the manual at any
time. Additional information can also be available online
(e.g. to video tutorials), in this case there will be a QR code
to scan with your smart phone, and a readable link which
you can type into a browser address line.
If in Standby Mode, VBar Control can be powered on by
swiping from right to left, on the touchscreen. Standby
Mode has distinct power saving features. If you do not use
your VBar Control for a prolonged time, it will switch off
completely, to conserve battery charge, and depending on
the current state of battery charge.
■ At ≥ 50 % battery charge, VBar Control will remain in Standby Mode
for 6 hours.
■ At ≤ 30 % battery charge, VBar Control will remain in Standby Mode
for 1 hour.
■ At ≤ 10 % battery charge, VBar Control will not enter Standby Mode
but switch off completely.
If enabled, VBar Control will monitor the 2.4 GHz band in
Standby Mode and automatically switch on if a previously
bound VBar NEO/Receiver Satellite is switched on.
☝ Hint In Standby Mode with Active Idle enabled, the radio
only draws approx. 60 mA, so it does not affect the overall
operating time very much, even if the radio is in Standby
Mode with Active Idle enabled during a whole day of use.
☝ Hint If you disable Active Idle, the radio will only draw ap-
prox. 25 mA in Standby Mode.
The built-in WiFi module connects to your wireless network
at home or to your personal hotspot on the go. It is as sim-
ple as selecting the SSID (name) of the network from a list
and typing in the password. VBar Control will automatically
re-connect every time the radio is switched on, and if one
of the known WiFi networks is present.
☝ Hint You can switch off this connectivity in the Transmitter
Settings, but we recommend to leave it turned on so you
have access to the online features at any time.
If online, you have direct access to the App Store (see
-
/
), to load and install additional Apps.
If online, you can update your radio and the Apps on it at
any time, to the latest version.
VBar Control Touch features a couple of gestures and the
option to open context menus or additional settings.
■ Touch and hold with two ngers will call up the battery state if VBar
Control is in Standby Mode.
■ Touch and hold with two ngers will enable/disable a Screen Lock if
VBar Control is running.
■ Touch with three ngers will create a quick screenshot, independent-
ly from the switch assigned in the Screenshot App.
■ If an item on the screen has a blue triangle marker to it, a long touch
will show a context menu or a secondary set of settings.
To Next Page
Loading...
Need help?
General
