6
Benefits at a glance
■ Setup, programming and adjusting of VBar-controlled
models accomplished directly via VBar Control radio.
■ Readily understandable graphic user interface.
■ Easy programming for new models via the familiar
VBar setup wizard.
■ ESC setup wizard for programming all types of speed
controllers.
■ ESCs with VBar Control support can be programmed
directly from the radio.
■ Up to eight parameters can be ne-tuned simultane-
ously, using the optional inputs. With adjustable
limitation of the the respective range of values.
■ Bank switching with three banks (fourth Bank for
Autorotation optional).
■ Real time logging and real time graphic vibration
analysis available on the screen.
■ Graphical telemetry log analyzer for stored ights
(overview, energy consumption, event-log) directly
readable on the screen.
■ Create your own screen design directly on the touch-
screen display.
■ Full manual available on the radio, by means of context
sensitive help.
■ Easy bind process: allows to bind and y any model
equipped with VLink (e.g. a buddy‘s model), with your
own transmitter (Model Sharing).
■ Automatic power-on from Standby, if an already bound
model is switched on.
■ Several telemetry functions are available, such as
voltages, current, rpm, speed, temperature and power
consumption of the batteries (may need additional
hardware).
■ Multiple timer functions available with warnings and
reminders via sound, voice, or vibration output.
■ Wireless buddy boxing with two VBar Control radios,
fully congurable.
■ Interact with your smart phone via WiFi (control your
music player, exchange photos, open web sites or
videos, expand your display for telemetry purposes ...)
—Apps for Android™ and iOS™ are under develop-
ment, will be released later on.
■ Cloud functions under development (e.g. for archiving,
interaction with other users; usage optional).
■ Access our App Store and do over-the-air online-up-
dates via WiFi*.
■ Over-the-air online-update your VBar NEO-ybarless
systems via WiFi* (for purchases, a device with internet
access and web browser is required).
* Online features require a WiFi connection and a device with internet
access. Data transfers may cause additional costs, depending on
your mobile data plan.
■ Extra bright capacitive 5.8 inch multi-touch color
display, with ambient-light sensor to automatically
control the brightness.
■ Very good readability even in bright sunlight.
■ WiFi module connects to your WiFi network at home as
well as to your personal hotspot on the go.
■ Very fast start-up time, from fully off to fully operational
in three seconds.
■ High perfomance, low power controller for best user
experience and long runtimes.
■ Reliable 80 Channel 2.4 GHz FHSS bidirectional ight
control, programming/setup and telemetry remote
control system.
■ Unlimited model memory.
■ Virtually unlimited number of control channels.
■ High range, low latency, antenna diversity both on
transmitter and receiver.
■ Intelligent antenna monitoring and management.
■ Fully equipped with four 3-position switches, two
3-position quick-break-switches as well as six rotary
inputs (four trim wheels, two rotating knobs), all fully
programmable.
■ Precision gimbals with four ball bearings, fully
adjustable.
■ Collective stick can be equipped with optional throw
limiter.
■ Delicate rubber lining for comfortable, slip-free and
safe holding.
■ Well-balanced with two-point neck-strap attachment,
no additional retainer bracked required.
■ Large 2 Watt loudspeaker for alarms and voice output.
■ Vibration alarm (adjustable).
■ Memory accessible as a USB memory stick, no drivers
needed.
■ Built-in Lithium Polymer battery allows for long run
times.
■ Charge through USB connector or built-in charger.
■ Power supply for fast charging included.
To Next Page
Loading...
Need help?
General
