Name: Mimosa C5
Brand: Mimosa
Rating: 5 (1 reviews)

Mimosa Client Help Content

Mimosa Clients Dashboard

Reading the Performance Charts

IP Throughput and Packet Error Rate (PER) are charted over 60 seconds in 5-second intervals. The newest data

shows up on the right and scrolls to the left over time. You can toggle between the charts by clicking on the

navigation circles at the bottom of the panel. If enabled, click on the cloud icon to view historical data within the

Manage application.

The IP Throughput graph plots three lines representing transmit, receive, and aggregate (summed) throughputs at

Layer 2. The results here may differ from those measured using speed test tools, due to protocol overhead and

encapsulation. Note that internal Bandwidth test results are excluded.

The Packet Error Rate (PER) is the number of packets with errors divided by the total number of packets sent within

a 5-second period. Lower values result in higher modulation, while higher values indicate the presence of

interference and result in lower modulation. Tx PER is an indication that the local radio did not receive an ACK from

the remote radio, so is forced to retransmit the same information again.

Note: PER will be higher upon initial association, and will usually settle within 30-60 seconds. This is

because association requires that the radios “listen” more carefully for their link partner until they are

linked, and this listening period is subject to more interference until Automatic Gain Control (AGC) and

Rate Adaptation (RA) adjust parameters to accommodate the conditions. PER values are exchanged

between radios asynchronously, so the values may not match exactly when referencing both radios at the

same time.

Mimosa C5 Client Manual

Other manuals for Mimosa C5