Defibrillator/Monitor Operator’s Manual 21 - 13
21.6.16 Data Management Setup Menu
21
.6.17 Test Setup Menu
21.6.18 Network Setup
Alm Rec HR On, Off Off Sets whether the parameter is
automatically recorded when
the related alarm is triggered.
ARR
PVCs
Resp
SpO2
PR
NIBP
CO2
Menu Item Options/Range Default Description
Menu Item Options/Range Default Description
Tabular Trends Interval 1 min, 2 min, 5 min, 10 min,
15 min, 30 min, 60 min
5 min Sets the interval that trends are
stored.
Event Wave Length 8s, 16s, 32s 16 s Sets the length that events are
stored.
Menu Item Options/Range Default Description
User Test Prompt On, Off Off Sets whether the equipment
reminds to perform the user test
if the recommended test time is
reached.
Auto Test Time 24 h: 00 to 23
12 h: 12AM to 11PM
3:00 Sets the initiated time for auto
test performed every day.
Menu Item Options/Range Default Description
Network Type LAN, WLAN LAN Sets the network type.
Address Type DHCP, Manual DHCP • If [Address Type] is set to
[DHCP]: the equipment
automatically gets the IP
address.
•If [Address Type] is set
to[Manual]: [Local IP
Address], [Subnet Mask]
and [Gateway] are required.
Restoring factory default
configurations does not change
this setting.
Local IP Address 0 - 255 0. 0. 0. 0
Subnet Mask 0 - 255 0. 0. 0. 0
Gateway 0 - 255 0. 0. 0. 0
DNS Address Type DHCP, Manual DHCP • If [DNS Address Type] is set
to [DHCP]: the equipment
automatically gets the DNS
address.
•If [DNS Address Type] is set
to[Manual]: [Preferred DNS
Server] and [Alternate DNS
Server] are required.
Preferred DNS Server 0 - 255 0. 0. 0. 0
Alternate DNS Server 0 - 255 0. 0. 0. 0
To Next Page
Loading...
Need help?
General
