System Diagnosis and Support 11-3
11.1.4 Status of Entire Device
Status of
entire
device
Status definition and
description
Access Exit
Scan
status
The indicator is green in power-on
status; the Freeze indicator is white
or off.
Enter or exit the scan status via [Freeze] key
Frozen
status
The indicator is green in power-on
status; the Freeze indicator is
orange.
Enter or exit the frozen status via [Freeze] key
Standby
status
The standby indicator blinks
orange.
1 short press the power
button, then, the system
enters into the standby
status by choosing from the
status popped on the
screen.
2 If there is no operation for
a period of time, the system
would enter into the standby
status automatically.
The system restores
to the frozen status
after restarting by
short-pressing the
power button.
Screen-sav
er status
The brightness of the monitor keeps
the same;
The logo “mindray” scrolls.
Turn the backlight of the control
panel off.
The system is frozen.
Hardware system of ultrasound
imaging is in sleep mode.
The system would
automatically enter into the
screen-saver status from
the frozen status if there is
no operation for the time set
firstly.
When you press any
keys on the control
panel, the system
would return to the
frozen status. The
brightness and the
backlight of the
control panel restore
to previous status.
Power-off
status
The system is on the power-off
status (AC power is plugged in),
and only the AC indicator is on. See
battery indicator's description for
battery indicator status.
Short-press the power
button, and then the system
is powered off by choosing
from the status popped on
the screen.
Start the system by
short-pressing the
power button.
11.1.5 Status Indicator of Gel Warmer
Status indicator Icon Status definition and indicators
Ultrasound Gel
Warmer
Double-color
indicator
Locates in the right of
the warming control
switch
1. Green: the gel warmer is powering and working
normally;
2. Orange: abnormal working status.
To Next Page
Loading...
Need help?
General
