Patient Data Management 11-1
11 Patient Data Management
An exam record consists of all information and data of one exam.
An exam record consists of the following information:
Patient basic information and exam data
Image files
Reports
NOTE:
1.
DO NOT use the internal hard drive for long-term image storage. Daily
backup is recommended. External storage media is recommended for
image archive.
2.
The system patient database space is limited, please back up or clear
patient data in time.
3.
Mindray is not responsible for lost data if you DO NOT follow suggested
backup procedures.
11.1 Patient Information Management
11.1.1 Enter Patient Information
The general patient information and exam information are entered through the Patient Info
screen, for details; please refer to “4.2.1 New Patient Information”
After completion of patient information entry, click [OK] to save the patient information to
the patient data.
11.1.2 Patient Information Setting
Open “[Setup] → [System Preset] → [General]”, and then set the following in the Patient
Info area. Here, you can select if to display patient gender, age or operator in the screen;
set the H&W applied unit and select the using surface formula.
Setting patient information display
H&W Unit
Surface formula setting
To Next Page
Loading...
Need help?
General
