EasyManuals Logo
Home>Minelab>Metal Detector>GPX 5000

Minelab GPX 5000 User Manual

Minelab GPX 5000
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
21Taking Care of your
Battery
The Lithium-ion battery is specifically designed
for the GPX Series.
The Lithium-ion battery is not compatible with non-GPX
Series detectors. The GPX 5000 and GPX 4800 are supplied
with a power lead which has been specifically designed to fit
GPX Series detectors only. Attempting to use the Lithium-ion
battery pack with other detectors may damage the detector
or the battery pack. Do not try to adapt this battery to other
models as it will very likely cause damage.
Do not charge the battery at temperatures above 45°C (11F).
Do not charge the battery at temperatures below 0°C (32°F).
Do not leave the battery in hot conditions (e.g. on the
dashboard of your car or rear parcel shelf).
Do not immerse the battery in any liquid or allow
water ingress.
Do not throw the battery or impact it in any way.
Do not short-circuit the battery.
Do not use the battery if it is damaged or deformed.
Do not disassemble or reconstruct the battery.
Do not incinerate the battery.
In the event of a fault, you should return the battery to a
Minelab authorised service centre for repair. The use of non-
approved components will VOID YOUR WARRANTY. There
are no user serviceable parts within this battery pack.

Table of Contents

Other manuals for Minelab GPX 5000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Minelab GPX 5000 and is the answer not in the manual?

Minelab GPX 5000 Specifications

General IconGeneral
BrandMinelab
ModelGPX 5000
CategoryMetal Detector
LanguageEnglish

Related product manuals