Minelab GPX 5000 User Manual

76
Custom Name ( )
Changing your Custom Search Mode name.
You can personalise any of the four Custom Search Modes
with a name from the Custom Name list.
For example, if you regularly detect in exposed bedrock you
can set your own Custom 'Bedrock' Search Mode:
1 Select Custom on the Search Mode switch (located on the
Front Control Panel).
2 Scroll down the menu and a Search Mode will be
highlighted, e.g. Patch.
3 Scroll to the bottom of the menu until you see
Custom Name.
4 Using the Setting knob, scroll down until 'Bedrock' is
selected, then move the function knob to apply the
name change.
5 The Search Mode name is now Bedrock and any mode
specific setting changes you make are automatically saved
when you switch the unit off.
6 You can now switch between Deep, General and Custom/
Bedrock via the Search Mode switch on the front panel.
Note: Even when doing an All Settings Factory Reset your
Bedrock, and other Custom Search Mode, settings are
still preserved.
1
2
3
4
Custom Names
Patch
Bedrock
Pinpoint
Gridding
Diggings
Salt Lake
Test A
Test B
Mode 1
Mode 2
Mode 3
Mode 4
Hi-Mineral
Lo-Mineral
Very Deep
Shallow
Hi Trash
Beach

Minelab GPX 5000 Specifications

General

Brand	Minelab
Model	GPX 5000
Category	Metal Detector
Language	English