147
45.0 Appendix I: Label Requirements for Zone Identification
If individual zones are used for various applications, the labelling of these zones must be in
accordance with ULC/CAN S527-11 Table 2; of which is partially included below:
LABEL DESIGNATIONS IN ENGLISH DESCRIPTION OF FUNCTION
XXXa Alarm Signal Activation or
XXX
aAlarm Signal ON
Circuit Or Area Evacuation Manual Control
XXXa Alert Signal Activation or
XXX
a Alert Signal ON
Circuit Or Area Alert Manual Control
XXXa By-pass
Ancillary Bypass
XXXa ON
Ancillary Device Indication
XXXa OFF
Ancillary Device Indication
Building Safety or Bldg Safety
Common Indication Associated With
Property And Building Safety
XXXb
Specific Indication Associated With
Property And Building Safety
Emergency and building events
Common Indication Associated With
Emergency And Building Events
XXXb
Specific Indication Associated With
Emergency And Building Events
XXXb
Emergency Or Building Event Manual
Control
XXXa Bypass
Bypass Output Function
Activate XXXa or equivalent followed byXXXa
Initiate Manual Control Function
Remote Connection Bypass or equivalent
Bypass Connection For Fire Service
Response
Signal Circuit Trouble Signal Circuit Fault Indication
Signal Silence Inhibit
Prevent Silence Of Signal For A Preset
Time
Supervisory
Common Indication Associated With
Supervisory Inputs
XXXa
Specific Indication Associated With
Supervisory Input
Supervisory Signal Silence
Manual Signal Silence Control For
Supervisory Signal
Telephone Call-in Common Telephone Call-In Indication
XXXa Telephone Call-in
Specific Telephone Call-In Indication
XXXa Telephone Trouble
Telephone Circuit Fault Indication
XXXa Telephone Select
Telephone Circuit Manual Control
Trouble Common Trouble Signal Indicator
XXXa Trouble
Specific, Circuit Or Area Trouble Signal
Indicator
a replace XXX with location and/or device specific description.
b such as alarms, life safety, supervisory, building safety and trouble
To Next Page
Loading...
Need help?
General
