FX-350/351 Series Programming Manual
33
After the confirmation, the device is un-bypassed and the information message shows that the device is un-
bypassed.
Operation Menu/Bypass/2. Groups
Configured bypass groups can be bypassed using this option. The list of all the configured bypass groups is
displayed and the user can select which group to bypass.
Scroll up/down to select group and press Enter. If the group selected is not bypassed the user is prompted to
bypass the group.
After the confirmation the group is bypassed and the message appears that the group is bypassed.
If the group is already bypassed, the user is prompted to un-bypass the group.
After the confirmation, the group is un-bypassed and the message is that the group is un-bypassed.
Operation Menu/Bypass/3. Loop
The whole loop either conventional or addressable can be bypassed using this option. The user is prompted to
enter the loop number to be bypassed.
If the loop is not bypassed the user is prompted to bypass the loop.
After the confirmation, the loop is bypassed and the message is that the loop is bypassed.
If the loop is already bypassed, the user is prompted to un-bypass the loop.
After the confirmation the loop is un-bypassed and the information message is that the loop is un-bypassed.
Device /circuit
Unbypassed
--- Bypass groups---
1. Bypass Floor A
2. Bypass Floor B
3. Bypass Floor C
Group not bypassed
Bypass? Y/N
Group
Bypassed
Group not bypassed
Unbypass
?Y/N
Group
Unbypassed
Loop number
Loop :__
Loop 0 not bypassed
Bypass ?Y/N
Loop
Bypassed
Loop 0 is bypassed
Unbypass ?Y/N
To Next Page
Loading...
Need help?
General
