248
FX3G/FX3U/FX3GC/FX3UC Series
Programming Manual - Basic & Applied Instruction Edition
9 Move and Compare – FNC 10 to FNC 19
9.5 FNC 14 – CML / Complement
9.5 FNC 14 – CML / Complement
Outline
This instruction inverts data in units of bit, and then transfers (copies) the inverted data.
1. Instruction format
2. Set data
3. Applicable devices
S: This function is supported only in FX3U/FX3UC PLCs.
Explanation of function and operation
1. 16-bit operation (CML and CMLP)
Each bit of a device specified as is inverted (from 0 to 1 or from 1 to 0), and then transferred to .
• When a constant (K) is specified as , it is automatically converted into binary.
• This operation is useful when a logically inverted output is required as an output from a PLC.
Operand Type Description Data Type
Data to be inverted or word device number storing data 16- or 32-bit binary
Word device number storing inverted data 16- or 32-bit binary
Oper-
and
Type
Bit Devices Word Devices Others
System User Digit Specification System User
Special
Unit
Index
Con-
stant
Real
Number
Charac-
ter String
Pointer
XYMTCSD.b KnX KnY KnM KnS T C D R U\G VZModifyKH E ""P
33333333 S 33 3 33
3333333 S 33 3
DCML
DCMLP
Mnemonic Operation Condition
P
FNC 14
CML
D
16-bit Instruction
5 steps
CML
CMLP
Mnemonic Operation Condition
Continuous
Operation
Pulse (Single)
Operation
32-bit Instruction
9 steps
Continuous
Operation
Pulse (Single)
Operation
S
D
S
D
S
D
S
FNC 14
CML
→
Sign bit (0: Positive, 1: Negative)
0101110001010101
0 1 0 1 0 1 0 1 1 1 0 0 0 1 0 1
Inverted data is transferred.
When command contact turns ON
b15 b14 b13 b12 b11 b11 b9 b8 b7 b6 n5 b4 b3 b2 b1 b0
S
D
Command
input
S
D
S
D
To Next Page
Loading...
Need help?
General
