Mitsubishi FX3U Series Programming Manual

903
FX3G/FX3U/FX3GC/FX3UC Series
Programming Manual - Basic & Applied Instruction Edition
B Instruction Execution Time
B-1 Basic Instruction Execution Time
31
FNC276-FNC279 Data Transfer 3
32
FNC280-FNC289 High-Speed Processing 2
33
FNC290-FNC299 Extension File Register
34
FNC300-FNC305 FX
3U
-CF-ADP
35
SFC•STL Programming
36
Interrupt Function
37
Special Device
38
Error Code
A
Version Up Information
B
Execution Times
Appendix B: Instruction Execution Time
The instruction execution time in FX3G, FX3U, FX3GC and FX3UC PLCs is as shown below:
Measurement condition
• High-speed counters and interrupt instructions (I) are not used together.
• In operands, data registers are used as target devices.
• Indexing (V or Z) is not provided.
Appendix B-1 Basic Instruction Execution Time
•FX3U/FX3UC PLCs
Instruction
Execution time in ON status (µs) Execution time in OFF status (µs)
Remarks
16-bit instruction 32-bit instruction 16-bit instruction 32-bit instruction
Contact instructions
LD 0.065
0.129 µs in 2-step instruction
*1
0.193 µs in 3-step instruction
*3
LDI 0.065
0.129 µs in 2-step instruction
*1
0.193 µs in 3-step instruction
*3
LDP 7.8 ⎯
LDF 7.8 ⎯
AND 0.065
0.129 µs in 2-step instruction
*1
0.193 µs in 3-step instruction
*3
ANI 0.065
0.129 µs in 2-step instruction
*1
0.193 µs in 3-step instruction
*3
ANP 7.5 ⎯
ANF 7.5 ⎯
OR 0.065
0.129 µs in 2-step instruction
*1
0.193 µs in 3-step instruction
*3
ORI 0.065
0.129 µs in 2-step instruction
*1
0.193 µs in 3-step instruction
*3
ORP 7.4 ⎯
ORF 7.4 ⎯
Connection instructions
ANB 0.065
ORB 0.065
MPS 0.065
MRD 0.065
MPP 0.065
INV 0.065
MEP 3.4
MEF 3.4
Output instructions
OUT Y,M 0.065
0.129 µs in 2-step instruction
*2
0.193 µs in 3-step instruction
*3
OUT S 4.8 4.8
OUT T K 0.71 0.71
T192 to T199, T246 to T511
11.6 µs in execution in ON status
8.2 µs in execution in OFF status

Mitsubishi FX3U Series Specifications

General

Brand	Mitsubishi
Model	FX3U Series
Category	Controller
Language	English