1 - 2 1 - 2
MELSEC-A
1 OVERVIEW
1.2 Features
The AJ65SBT-CLB has the following features.
(1) Seamless connection of two networks
The AJ65SBT-CLB is a bridge module that can connect CC-Link and CC-Link/LT
seamlessly.
Using RX and RY (bit devices), one bridge module can control up to 224 points
(448 points when both inputs and outputs are used).
(2) Confirmation of communication status of CC-Link/LT remote
stations
The data link statuses and I/O errors of CC-Link/LT remote stations can be
confirmed from the PLC CPU of the CC-Link master station.
(3) Configuration of CC-Link/LT using A, QnA series
A CC-Link/LT system can be configured using the MELSEC-A, QnA series via
CC-Link.
(4) Wire saving and easy installation
The one-touch connectors ensure easy installation by using as the CC-Link side
communication connectors.
(5) Compact size
The AJ65SBT-CLB has the same size as the AJ65SBTB1-8 compact remote
I/O module.
(Width 87.0 (3.43)
height 49.0 (1.93) depth 40.0 (1.57) mm (inch))
Either of screws or DIN rail can be used to mount the module to a control panel.
1
To Next Page
Loading...
Need help?
General
