A - 2 A - 2
[Installation Precautions]
!
CAUTION
• Use each product in an environment as specified in the "general specification" in this manual.
Using the programmable controller outside the range of the general specifications may result in
electric shock, fire or malfunction, or may damage or degrade the product.
• Securely fix the product with DIN rails or module mounting screws.
Failure to do so may cause a fall or malfunctions of the product.
• Do not touch the conducted area or electric parts of the product.
Doing so may cause product malfunctioning or breakdowns.
[Wiring Precautions]
!
CAUTION
• For application to the CC-Link/LT, use cables specified by the CC-Link Partner Association.
Otherwise, performance of the CC-Link/LT cannot be guaranteed. Also, wire a network properly
in accordance with the specifications given in Chapter 3.
If not, normal data transmission cannot be guaranteed.
• Be sure to shut off all phases of the external power supply used by the system before installation
or wiring.
Not doing so can cause the product to be damaged or malfunction.
• Always ground the FG terminal to the protective ground conductor.
Not doing so can cause a malfunction.
• Make sure of the rated voltage and pin-outs of the product for proper wiring.
Connecting power source of improper rated voltage or faulty wiring may cause a fire or failure.
• Ensure that no foreign matter such as chips and wire-offcuts enter the product.
Foreign matter can cause a fire, failure or malfunction.
To Next Page
Loading...
Need help?
General
