Mitsubishi Melsec-A AJ65SBT User Manual

2 - 7 2 - 7
MELSEC-
A
2 SYSTEM CONFIGURATION
2.4 Parts Sold Separately
The plugs for AJ65SBT-CLB are sold separately.
Please purchase them as necessary.
Mitsubishi model
name
Part model name
(manufacturer)
Specifications
Color of
the cover
communication line
0.5 (AWG#20)
2.2 to 3.0
One-touch
connector plug for
communication
1, 2
A6CON-L5P
35505-6000-
BOM GF (3M)
shielded cable (drain wire)
0.5 (AWG#20)
Red
Online connector for
communication
3
A6CON-LJ5P
35720-L200-B00
AK (3M)
⎯ ⎯ ⎯ ⎯
One-touch connector
plug with terminating
resistor
(including 1)
A6CON-TR11 ⎯
One-touch connector plug with
terminating resister attached
for communication (110Ω)
⎯ ⎯ ⎯
1 Mitsubishi's A6CON- 5P includes 10 plugs.
2 Once insulation-displaced, the one-touch connector plugs cannot be reused.
3 Mitsubishi's A6CON- J5P includes 5 plugs.
REMARK
• As following table indicates, the optional plugs/connectors are compatible with the
connectors for this module.
Connector for this Module Optional Parts
One-touch connector for
communication
• One-touch connector plug for communication
• Online connector for communication
• One-touch connector plug with terminating resistor
• Cables, connectors and terminating resistors on the CC-Link/LT side
For inquiries about the cables, connectors and/or terminating resistors on the CC-
Link/LT side, access the home page of the CC-Link Partner Association on the
Internet at http://www.cc-link.org/
.

Mitsubishi Melsec-A AJ65SBT Specifications

General

Brand	Mitsubishi
Model	Melsec-A AJ65SBT
Category	Control Unit
Language	English