Mitsubishi MELSEC A1S62P User Manual

INSTALLATION^
[Base unit mounting instructions I
The CPU and extension base units should be mounted in accordance with the
following instructions;
1. To improve the ventilation of the PLC and to facilitate the addition or
removal of any modules, allow a minimum
30 mm 11.18 in. clearance
around the base unit.
Indicates the panel top, wiring duct, or any assembly
or more
//////////////////////
Parallel Mounting
30 mrn (1 .I7 in.)
D
- 30 mrn (1.17 in.)
- Or Inore
Serial Mounting
45

Mitsubishi MELSEC A1S62P Specifications

General

Brand	Mitsubishi
Model	MELSEC A1S62P
Category	Controller
Language	English