Mitsubishi Mirage 2017 User Manual

Automatic air conditioning (if so equipped)
Comfort controls 7-17
7
N00703600017
Push the switch to turn off the air condition-
ing system.
N00731701485
In normal conditions, use the system in the
AUTO mode and follow these procedures:
1. Push the AUTO switch.
2. Set the temperature control switch to the
desired temperature. The temperature can
be set within a range of around 61 to 89
(Type 1) or 17 to 31 (Type 2).
The vents, recirculation/outside air, blower
speed, temperature adjustment and ON/OFF
of air conditioning will be controlled auto-
matically.
N00731801138
Blower speed and vent mode may be con-
trolled manually by setting the blower speed
selection switch and the MODE switch to the
desired positions. To return to automatic
operation, press the AUTO switch.
N00732401522
To remove frost or mist from the windshield
and door windows, use the MODE switch or
defogger switch (“ ” or “ ”).
OFF switch
Operating the air conditioning
system (automatic mode)
CAUTION
 The engine speed may increase when the air
conditioning (cooling or heating) is operat-
ing.
Since creeping will occur strongly if the
engine speed becomes high while the vehicle
with a CVT is stationary, fully depress the
brake pedal to prevent the vehicle from
creeping.
NOTE
 Set the temperature at about 75 (Type 1) or
24 (Type 2) under normal conditions.
Operating the air conditioning
system (manual mode)
CAUTION
 The engine speed may increase when the air
conditioning (cooling or heating) is operat-
ing.
Since creeping will occur strongly if the
engine speed becomes high while the vehicle
with a CVT is stationary, fully depress the
brake pedal to prevent the vehicle from
creeping.
Defrosting or defogging (wind-
shield, door windows)
CAUTION
 For safety, make sure you have a clear view
through all the windows.
BK0235100US.book 17 ページ ２０１５年１１月２０日 金曜日 午後３時１２分

Mitsubishi Mirage 2017 Specifications

General

Brand	Mitsubishi
Model	Mirage 2017
Category	Automobile
Language	English