To exit this mode, press the button again.
N00765101053
You can displays titles with tag information.
The display changes as follows every time
the INFO button is pressed during playback:
Folder name File name Normal display.
1. Press and hold the INFO button until you
hear a beep.
2. The display changes as follows every time
the INFO button is pressed briefly: Album
TAG Track TAG Artist TAG
Genre TAG (vehicles with Bluetooth
®
2.0
interface) Normal display.
N00765200073
Desired tracks can be selected and played
from your USB memory device by “Artist”,
“Album”, “Playlist” and “Genre” using voice
commands.
For information concerning the voice recog-
nition function or speaker registration func-
tion, refer to “Bluetooth
®
2.0 interface” on
page 5-81.
The playback sequence of tracks is the same
as when an iPod is connected. Refer to the
“To play iPod tracks via voice operation” on
page 7-31.
To use the voice operation, press the
SPEECH button (A) first.
N00765300104
You can wirelessly connect a digital audio
player or cellular phone supporting Blue-
tooth
®
to listen to the tracks on the connected
device.
Refer to “Bluetooth
®
2.0 interface” for the
connecting method, etc. on page 5-81.
The following explains the basic playback
method.
To switch the display
Folder title
Tag information
Press and hold the INFO button again until
you hear a beep, and the tag information dis-
play returns to the folder title display.
Up to 11 characters are shown in the display
at once. If the title is cut off in the middle,
press the PAGE button. The next characters
are displayed every time this button is
pressed.
If no title is stored, “NO TITLE” is shown in
the display.
Characters that cannot be displayed are sub-
stituted by
“•”.
To play USB memory device
tracks via voice operation (vehi-
cles with Bluetooth
®
2.0 inter-
face)
Preparation for voice operation
To Next Page
Loading...
Need help?
General
