4. Lightly press the multi-information meter
switch to switch in sequence from JAPA-
NESE → ENGLISH → GERMAN →
FRENCH → SPANISH → ITALIAN →
“---” (do not display warning message) → RE-
TURN → JAPANESE.
5. If you hold down the multi-information me-
ter switch for about 2 seconds or more, the
setting is changed to the selected language.
NOTE
l
The memory of the language setting is erased
if the battery is disconnected, and it returns
automatically to ENGLISH.
l
If “---” is selected in the language setting, a
warning message is not displayed when there
is a warning display or interrupt display.
Changing the language cooperative control*
E00523300442
The language used in MITSUBISHI Multi-Commu-
nication System (MMCS) (if so equipped) or the
Hands-free Bluetooth
®
cellular phone interface sys-
tem with voice recognition (if so equipped) can be
changed automatically to the same language as that
shown in the multi-information display.
1. Press and hold the multi-information meter
switch for about 2 seconds or more to switch
from the setting mode screen to the menu
screen.
Refer to “Changing the function settings
(when the ignition switch is “ON”)” on page
3-17.
2. Lightly press the multi-information meter
switch to select “
” (language cooperative
control).
3. Press and hold the multi-information meter
switch to switch in sequence from A (lan-
guage cooperation enabled) → M (language
cooperation disabled) → A (language cooper-
ation enabled).
The setting is changed to the selected condi-
tion.
NOTE
l
The memory of the language cooperative con-
trol is erased if the battery is disconnected,
and it returns automatically to A (language
cooperation enabled).
l
The language display modified with the lan-
guage setting can be switched in the follow-
ing manner.
• When A (language cooperation enabled)
has been selected with the language coop-
erative control, the language for
MITSUBISHI Multi-Communication
System (MMCS) (if so equipped) or the
Hands-free Bluetooth
®
cellular phone in-
terface system with voice recognition (if
so equipped) is automatically changed to
the language selected for the multi-infor-
mation display.
• When M (language cooperation disabled)
has been selected with the language coop-
erative control, the language for
MITSUBISHI Multi-Communication
System (MMCS) (if so equipped) or the
Hands-free Bluetooth
®
cellular phone in-
terface system with voice recognition (if
so equipped) is not automatically
changed to the language selected for the
multi-information display.
Instruments and controls
3-21
3
To Next Page
Loading...
Need help?
General
