To reduce the glare
The lever (A) at the bottom of the mirror can be
used to adjust the mirror to reduce the glare from
the headlamps of vehicles behind you during night
driving.
1- Normal
2- Anti-glare
Outside rear-view mirrors
E00600900628
To adjust the mirror position
E00601000479
The outside rear-view mirrors can be operated
when the ignition switch is in the “ON” or “ACC”
position.
WARNING
l
Do not attempt to adjust the rear-view
mirrors while driving. This can be danger-
ous.
Always adjust the mirrors before driving.
l
Your vehicle is equipped with convex
type mirrors.
Please take into consideration, that ob-
jects you see in the mirror will look small-
er and farther away compared to a nor-
mal flat mirror.
Do not use this mirror to estimate dis-
tance of following vehicles when changing
lanes.
1. Place the lever (A) to the same side as the mir-
ror whose adjustment is desired.
Except for vehicles equipped with the mirror retractor
switch
Vehicles equipped with the mirror retractor switch
L- Left outside mirror adjustment
R- Right outside mirror adjustment
2. Press the switch (B) to the left, right, up or
down to adjust the mirror position.
1- Up
2- Down
3- Right
4- Left
3. Return the lever (A) back to the middle posi-
tion (•).
Retracting and extending the outside
mirrors
E00601100584
The outside mirror can be folded in towards the
side window to prevent damage when parking in
narrow areas.
Starting and driving
4-10
4
To Next Page
Loading...
Need help?
General
