Turn-signal lever
E00506501387
1- Turn-signals
When making a normal turn, use position
(1). The lever will return automatically when
cornering is completed.
2- Lane-change signals
When moving the lever to (2) slightly to
change a lane, the turn-signal lamps and indi-
cation lamp in the instrument cluster will on-
ly flash while the lever is operated.
Also, when you move the lever to (2) slight-
ly then release it, the turn-signal lamps and in-
dication lamp in the instrument cluster will
flash 3 times.
NOTE
l
If the lamp flashes unusually quickly, the
bulb in a turn-signal lamp may have burned
out. We recommend you to have the vehicle
inspected.
l
It is possible to activate the following func-
tions.
• Flashing of the turn-signal lamps when
the lever is operated with the ignition
switch or the operation mode is in ACC.
• Deactivate the turn-signal lamp 3-flash
function for lane changes
• The time required to operate the lever for
the 3-flash function can be adjusted.
For further information, we recommend
you to consult a MITSUBISHI MOTORS
Authorized Service Point.
On vehicles equipped with MITSUBISHI
Multi-Communication System (MMCS),
screen operations can be used to make
the adjustment. Refer to the separate own-
er’s manual for details.
Adaptive Front lighting System
(AFS)*
E00525100196
The AFS makes it easier for the driver to see ahead
at night. While the lamp switch is in the “ ” or
“AUTO” position (with the headlamps on), turning
the steering wheel causes a bending lamp to auto-
matically come on and illuminate the road in the di-
rection in which the vehicle is being turned, there-
by expanding the illuminated area of the road.
Instruments and controls
3-48
3
To Next Page
Loading...
Need help?
General
