Mitsubishi Q00CPU User Manual

6
FUNCTIONS
6.12 Writing in Program during CPU Module RUN
6.12.2 File-write in RUN
6 - 83
1
Overview
2
Performance Specification
3
Sequence Program Configuration and Execution Conditions
4
I/O Nunber Assignment
5
Memories and Files Handled by CPU Module
6
Functions
7
Communication using built-in Ethernet ports of CPU module
8
Communication with Intelligent Function Module
(6) Writing a SFC program file in RUN
Note6.25, Note6.26
Note27Note28
After writing SFC program file in RUN, the program starts from the beginning.
(7) For the prohibited operations
Note6.27
when writing data during RUN, when
changing T/C setting value, or at the time of transferring from a program
cache memory to a program memory
For the prohibited operations when writing data during RUN, when changing T/C
setting value, or at the time of transferring from a program cache memory to a
program memory, refer to Section 6.12.3 (2).
(8) Instruction which does not operate normally when writing data during
RUN
For instructions do not operate normally at write during RUN,
refer to Section 6.12.3 (3) in this section.
Note27
Note28
High
Performance
Note6.25
Process
Note6.25
\
When writing a SFC program file online in High Performance model QCPU or Process CPU,
confirm the versions of the CPU module and the GX Developer.
( Appendix 4.2, Appendix 4.3)
Note6.25
High
Performance
Process
Note6.25
\
The SFC program file cannot be written during RUN in the Universal model QCPU.
Note6.26
Universal
UD
Since a program cache memory is not used for the Basic model QCPU, High Performance model
QCPU, Process CPU, or Redundant CPU, data transfer from the program cache memory to the
program memory can be ignored.
Note6.27
Process
Redundant
Basic
Redundant
Note6.27Note6.27
Note6.27
Note6.26
Universal
UD
Note6.27
Process
Redundant
Basic
Redundant
Note6.27
Note6.27
Note6.27

Mitsubishi Q00CPU Specifications

General

Brand	Mitsubishi
Model	Q00CPU
Category	Controller
Language	English