10
DEVICE EXPLANATION
10.7 File Register (R)
10.7.4 File register registration procedure
10 - 74
9
Parameters
10
Device Explanation
11
CPU Module Processing
Time
12
Procedure for Writing
Program to CPU ModuleAppendicesIndex
10.7.4 File register registration procedureNote24
To use file registers, register the file registers with the CPU module in the following steps.
Note24
Figure 10.70 File register registration procedure
Basic
Note10.22
When using the Basic model QCPU, it is not necessary to register the file registers.
The file registers are automatically registered to the standard RAM.
Basic
Note10.22
"PLC file" tab screen at(PLC)
"parameter" dialog box
File register setting
Creating new device memory screen
"Use the following files" is selected.
Writing of the file register
[Online] [Write to PLC] screen
Writing of the parameter to the CPU module
Writing of the file register to the CPU module
Start
Setting of file
register to be used
"Not used" or "Use the same file
name as the program" is selected.
To Next Page
Loading...
Need help?
General
