12
PROCEDURE FOR WRITING PROGRAM TO CPU
MODULE
12.2 High Performance Model QCPU, Process CPU, Redundant CPU, Universal Model QCPU
12.2.1 Items to be examined for program creation
12 - 8
9
Parameters
10
Device Explanation
11
CPU Module Processing
Time
12
Procedure for Writing
Program to CPU ModuleAppendicesIndex
(5) Device initial value setting
Set the data necessary as the initial values to the High Performance model QCPU,
Process CPU, Redundant CPU or Universal model QCPU device memory and
intelligent function module buffer memory. ( Section 6.26)
(6) Examination of boot run
When executing boot run, make the boot file setting of the PLC parameter dialog box.
( Section 5.2.9, Section 12.2.5)
To Next Page
Loading...
Need help?
General
