APPENDICES
Appendix 4 Functions Added or Changed Due to Version Upgrade
Appendix 4.1 Basic model QCPU Upgrade
App - 104
9
Parameters
10
Device Explanation
11
CPU Module Processing
Time
12
Procedure for Writing
Program to CPU ModuleAppendicesIndex
(2) Additional functions and availability of the functions according to the
version of GX Developer
: Not related to function version, serial No., and GX Developer
*1 : When the CPU instruction installed by GX Developer Version 8 is read by GX Developer of Version 7 or earlier, it is
processed as an "instruction code error" by GX Developer.
*2 : Unsupported by the Q00JCPU.
TableApp.41 Additional functions and availability of the functions according to the version of GX Developer
New Function
Compatible
function version
Compatible
serial No.
Compatible
GX Developer
Function block
( GX Developer Operating Manual (Function
Block))
A 04121 or earlier
Version 8.00A or
later
Structured text (ST) language
( QCPU (Q Mode) Programming Manual
(Structured Text))
MELSAP3
( QCPU (Q Mode)/QnACPU Programming
Manual (SFC))
B
04122 or later
PID operation function
*1
( QCPU (Q Mode)/QnACPU Programming
Manual (PID Control Instructions))
Real number operation
*1
( Section 10.13.3)
Intelligent function module event interruption
( Section 6.23)
Device initial value automatic setting function
( Section 6.26)
Remote password setting function
( Section 6.19.2)
E-mail parameter
( Manual of the module that includes e-mail
function)
Online change using pointer ( Section 6.15.2)
Increased file register R capacity (32k points to 64k
points)
*2
( Section 10.7)
Multiple CPU System compatibility
( QCPU User's Manual (Multiple CPU System))
Version 8.00A or
later
Multiple-block online change
( Section 5.1.2(3)(b), Section 5.2.2(3)(b))
CC-Link Remote network additional mode
( CC-Link System Master/Local Module User's
Manual)
06112 or later
Version 8.03D or
later
Compatibility with CC-Link IE controller network
( CC-Link IE Controller Network Reference
Manual)
Version 8.68W or
later