-
38
-
4
0
Setting the ON timer
RUN/STOP
F2
PRESET
MENU
DEFROST
F3 F4F1
F2 F3 F4F1
⇒
Press “MENU” switch.
The display changes to “Main menu” screen.
Press “F4 (Set)” switch.
⇒
If Enable is selected by pressing
“F2 (Enable)” switch, go to Step .
⇒
When Disable has been selected by pressing “F3 (Disable)” switch, if “F4
(Set)” switch is pressed, the display returns to the screen of Step .
⇒
Press “F2 ()” or “F3 ()” switch,
and set the time (Date) of Set ON
timer.
Press “F2 ()” or “F3 ()” switch
till the display changes to
“Sub-menu” screen (Right figure).
Press “F4 (Select)” switch to
change to “Sub-menu” screen.
Press “F2 ()” or “F3 ()” switch
till the display changes to “Set
ON Timer” screen (Right figure).
Press “F4 (Select)” switch to
change to “ON timer enable”
mode (Right figure).
F2 F3 F4F1
F2 F3 F4F1
F2 F3 F4F1
Enable Disable SetBack
Set ON timer
ON timer enable
Enable Disable SetBack
Set ON timer
ON timer enable
▲ ▼ SelectBack
Main menu
▲
▼
Language
Sub-menu
Operating information
▲
▼ SelectBack
Sub-menu
▲
▼
Calendar and clock setting
Set ON Timer
Set OFF Timer
▲
▼ NextBack
Set ON timer
21 Oct 20:25 Starting operation
To Next Page
Loading...
Need help?
General
