-
40
-
4
0
Setting the OFF timer
RUN/STOP
F2
PRESET
MENU
DEFROST
F3 F4F1
F2 F3 F4F1
⇒
Press “MENU” switch.
The display change to “Main menu” screen.
Press “F4 (Set)” switch.
⇒
Press “F2 ()” or “F3 ()” switch,
and set the time (Date) of Set OFF
timer.
Press “F2 ()” or “F3 ()” switch
till the display changes to
“Sub-menu” screen (Right
figure).
Press “F4 (Select)” switch to
change to “Sub-menu” screen.
Press “F2 ()” or “F3 ()” switch
till the display changes to “Set
OFF Timer” screen (Right figure).
Press “F4 (Select)” switch to
change to “Set OFF timer” mode
(Right figure).
⇒
If Enable is selected by pressing
“F2 (Enable)” switch, go to Step .
⇒
When Disable has been selected by pressing “F3 (Disable)” switch, if “F4
(Set)” switch is pressed, the display returns to the screen of Step .
F2 F3 F4F1
F2 F3 F4F1
F2 F3 F4F1
Enable Disable SetBack
Set OFF timer
OFF timer enable
Enable Disable SetBack
Set OFF timer
OFF timer enable
▲ ▼ SelectBack
Main menu
▲
▼
Language
Sub-menu
Operating information
▲
▼ SelectBack
Sub-menu
▲
▼
Set ON Timer
Set OFF Timer
Contrast setting
▲
▼ NextBack
Set OFF timer
21 Oct 20:25 Stopping operation
To Next Page
Loading...
Need help?
General
