Moog Sub 37 User Manual

43
GLOBAL MENU
Pressing the GLOBAL button takes you to the GLOBAL MENU, which contains parameters that affect
all presets. When the GLOBAL button is illuminated the top right of the LED display will indicate which
page you are on, followed by a decimal point, and then which parameter line you have selected. Use
the buttons to choose a parameter for editing, and the FINE TUNE knob to scroll through a
selected parameter’s available options.
NOTE: You can also use the CURSOR button to select a parameter and the buttons to step
through the selected parameter’s available options. To exit a parameter, simply press CURSOR again.
INIT SETTINGS
ULT
LOCAL CONTROL
ALL: ...
KEYS: ON, OFF
WHEELS: ON, OFF
PANEL: ON, OFF
CALIBRATION
NOTE CAL >>
PRESSURE CAL >>
PITCH CV CAL >>
VOL CV CAL >>
HOLD [SAVE] TO
RESTORE DEFAULT
MIDI & GLOBAL
SETTINGS
TUNING SCALES
SCALE NUMBER: 0 - 31
CV MAPPING
PITCH: XXX (DEFAULT)
VOLUME: XXX (DEFAULT)
GATE: XXX (DEFAULT)
GATE INVERT: OFF, ON
PER PRESET: OFF, ON
SEQ OPTIONS
REF NOTE: FIRST, MID, C
PHASE RESET: OFF, ON
LATCH RSTRT: OFF, ON
DLAY PGM CHG: OFF, ON
MIDI OUTPUT: SEQ, KEYS
N
1
2
3
GLOBAL MENU 1.x
KB PRIORITY: LOW, HIGH, LAST, PRST
TUNING SCALE >>
VARIANCE: 0.0C - 40.0C (CENTS)
POT MODE: ABS, THRU, RLTV
LOCAL CONTROL >>
GLOBAL MENU 2.X
CV MAPPING >>
SEQ OPTIONS >>
SEQ PG CHASE: OFF, ON
FINE TUNE: TUNE, EDIT
PRESET MWHL: OFF, ON
GLOBAL MENU 3.x
CALIBRATION >>
INIT SETTINGS >>
CONTRAST: 0% ... 100%
MENU WRAP: OFF, ON
LIGHT SHOW: OFF, ON
FIRMWARE & PANEL VERSION
APPLY 1V TO PITCH CV INPUT
THEN PRESS [SAVE]
RECORD 1V
APPLY 4V TO PITCH CV INPUT
THEN PRESS [SAVE]
RECORD 4V
PRESS [SAVE] TO RESTORE
PITCH CV DEFAULT CALIBRATION
SET DEFAULT
APPLY 1V TO VOL CV INPUT
THEN PRESS [SAVE]
RECORD 1V
APPLY 4V TO VOL CV INPUT
THEN PRESS [SAVE]
RECORD 4V
PRESS [SAVE] TO RESTORE
VOL CV DEFAULT CALIBRATION
SET DEFAULT
M
PI
RE
RE
NOTE CALIBRATION
START NOTE: 0 - 127
END NOTE: 0 - 127
PRESS [SAVE]
TO BEGIN
PRESSURE CALIBRATION
SENSOR: XX
MINIMUM: 0 - 16380
AXIMUM: 0 - 16380
SLEW: 0 - 16380
CORD 1V >>
CORD 4V >>
SET DEFAULT >>
PITCH CV CAL
PI
RE
RE
CORD 1V >>
CORD 4V >>
SET DEFAULT >>
VOL CV CAL

Moog Sub 37 Specifications

General

Brand	Moog
Model	Sub 37
Category	Synthesizer
Language	English