Programmable
Waypoints
Preprogrammed
Waypoints
Only the alias is editable,
not the coordinates.
The Home and
Destination coordinates
are editable.
Coordinates can be
deleted one at a time, or
all at once.
Coordinates cannot be
deleted.
Note: The radio automatically exits the feature, if the
feature inactivity timer is enabled, when the radio is
left idle and the timer expires. You hear the Menu
Inactive Exit Tone upon feature exit.
Military Grid Reference System (MGRS) Coordinates
This feature can only be enabled through CPS
configuration. When the MGRS coordinate is
enabled, all location coordinates are displayed in
MGRS format, including the editable locations in
GPS.
Accessing the Outdoor Location Feature
Note: An ON radio menu may be present on the
Location menu screen if it is preprogrammed by the
dealer or system administrator.
Press the preprogrammed GPS button to toggle the
Outdoor Location feature to on or follow the following
procedure to access this feature via the radio menu.
1
or to Loc.
2
Press the Menu Select button directly below Loc.
The display shows Location off.
3 Perform one of the following actions:
• To obtain a location fix, press the Menu Select
button directly below On .
• Press the Menu Select button directly below
Optn.
or to Turn On GPS and press the
Menu Select button directly below Sel.
The front display shows the MGRS or latitude/
longitude location, time, and date of the last
successful location fix.
4 To obtain a new location fix, press the Menu
Select button directly below Rfsh.
The top line temporarily displays Please wait
while the new location is being determined. While
the new location is being determined, the location
signal can be a solid or blinking icon.
130
English