Motorola APX 7000 User Manual

Bluetooth
®
devices may or may not meet the mission
critical standard.
Your radio must be preprogrammed to allow you to
use this feature.
The default setting for Bluetooth-enabled radio is
Bluetooth ON. See Turning the Bluetooth Off on page
142 to turn the Bluetooth OFF.
Currently your radio supports the following Bluetooth
devices or profiles.
• Headset (HSP)
• Dial Up Networking (DUN)
• Personal Area Networking (PAN)
• Serial Port (SPP)
Note: APX 7000L radio does not support Bluetooth
Commercial of the Shelf (COTS) devices or the
Personal Area Network (PAN) data profile.
APX 7000L only works with Motorola MCW devices.
Turning the Bluetooth On
The following methods are options on how to turn the
Bluetooth on. The result of all the methods is the
same. You can use the options interchangeably
depending on your preference and the programmed
functions.
•
Turning the Bluetooth on via the radio menu BT:
a)
or to BT. To access the Bluetooth feature
screen, press the Menu Select button directly
below BT.
b)
or to Status and press the Menu Select
button directly below On.
The display shows Status On, and
appears.
If Bluetooth fails to launch, the display shows
Bluetooth on failed.
c) To return to the Home screen, press the Menu
Select button directly below Exit.
• Turning the Bluetooth on via the preprogrammed
button:
a) Press the preprogrammed button to turn on the
Bluetooth.
You hear a short, medium-pitched tone. The
display shows momentary Bluetooth on, and
appears.
Advanced Features
141
English

Motorola APX 7000 Specifications

General

Brand	Motorola
Model	APX 7000
Category	Two-Way Radio
Language	English