Motorola MC3000 Operating And Installation Manual

Installation
Configuring and Testing Deskset Functions
MC3000 Digital Deskset Operator and Installation Manual 2-17
(6880309L15-A)
2. Press the Menu/Home button to enter the sub-menu. Your sub-menu choices are:
Handset Mic, Headset Mic, Internal Mic and Deskset Mic. The first test is “Handset
mouthpiece to Handset ear piece” test. The first line of the LCD display will show
“Testing Audio” and the second line will show “Mic to Handset”.
3. Lift the handset off-hook, speak into the mouthpiece and listen for the transmission on
the internal speaker. The VU meter of the LCD display will show the volume level.
4. Adjust the volume of the handset ear piece and the internal speaker with the Volume
Control. See “Handset Microphone (mouthpiece) to the TX Line” on page 2-21 for
additional adjustments.
5. Press the Mode Up button to move to the next audio test in the sub-menu. The sec-
ond test is “Headset mouthpiece to Headset ear piece” test. The first line of the LCD
Display will show “Testing Audio” and the second line will show “Mic to Headset”.
6. Optionally, if you have an external headset, press the Transmit footswitch pedal,
speak into the headset microphone and listen for the transmission on the headset ear
piece. The VU meter of the LCD display will show the volume level.
7. Adjust the volume of the headset ear piece and the internal speaker with the Volume
Control. See “Desk Microphone to the TX Line” on page 2-21 for additional adjust-
ments.
8. Press the Mode Up button to move to the next audio test in the sub-menu. The third
test is “Internal Microphone to the Internal Speaker” test. The first line of the LCD dis-
play will show “Testing Audio” and the second line will show “Internal”.
9. Speak in the direction of the internal microphone and listen for the transmission on the
internal speaker. The VU meter of the LCD display will show the volume level.
10. Adjust the volume of the handset ear piece and the internal speaker with the Volume
Control. See “Internal Condenser Microphone to the TX Line” on page 2-20 for addi-
tional adjustments.
11. Press the Mode Up button to move to the next audio test in the sub-menu. The fourth
test is “Deskmic to Internal Speaker” test.The first line of the LCD display will show
“Testing Audio” and the second line will show “Deskmic”.
12. Optionally, if you have an external deskset microphone, press the Transmit button of
the external deskset microphone and listen for the transmission on the internal
speaker. The second line of the LCD display will show ”From: External Mic”.
13. Adjust the volume of the handset ear piece and the internal speaker with the Volume
Control. See “Desk Microphone to the TX Line” on page 2-21 for additional adjust-
ments.
14. Press the Menu/Home button to exit the sub-menu. The first line of the LCD display
will show “Test Audio” and the second line will show “Press Menu”.
6) SW Number Test
To check the version number of the software loaded in the deskset:
After you enter the program, press the Mode Down button five times to change the test to
the “SW Number Test” which is the sixth test option. The first line of the LCD display will
show “Sw Number”. The second line of the LCD display will show ”<actual software ver-
sion number to maximum of 14 digits>”.

Motorola MC3000 Specifications

General

Brand	Motorola
Model	MC3000
Category	Telephone
Language	English