Operation
Digital Remote Control Radio Operation
3-12 MC3000 Digital Deskset Operator and Installation Manual
(6880309L15-A)
LCD Display
The LCD display and digital radio function buttons emulate those on the specific model of
digital remote control radio controlled by the deskset. The LCD display consists of a single
two-row display:
• For the ASTRO Digital Spectra radio, the two rows of the LCD display show the infor-
mation that appears on the radio display and whether the radio has received a priority
mode when the scanning feature is activated:
• PRI indicates a Priority.
• NPRI indicates no priority mode.
Consult your radio’s documentation for more information on scanning and priority
modes.
• For the MCS 2000 and iDEN radios, the two rows of the LCD display correspond to
the two rows of the radio displays.
Buttons
The deskset digital radio function buttons are cross-referenced with each of the four digital
radio’s set of indicators and buttons by physical location. This means, that whatever func-
tion that particular digital radio button has been programmed to perform, the deskset will
exactly copy.
This manual will discuss functions that the operator will need to perform common to all
radio types. Please refer to the specific digital radio type user documentation for specific
instructions about all buttons and associated LCD display operations.
The following figures identify the physical location and cross-reference of the digital radio
buttons to the deskset buttons by button number:
• Figure 3-6, “MC3000 to ASTRO Digital Spectra (model W9)” on page 3-13
• Figure 3-7, “MC3000 to MCS 2000 (model III)” on page 3-14
• Figure 3-8, “MC3000 to iDEN (model M470)” on page 3-15
• Figure 3-9, “MC3000 to LTR (model CDM 1550, LS, LS+)” on page 3-16
To Next Page
Loading...
Need help?
General