Introduction to VIA VT6410 IDE RAID
6-11
Duplicate Critical RAID 1 Array
When booting up the system, BIOS will detect if the RAID 1 array has any
inconsistencies between user data and backup data. If BIOS detects any
inconsistencies, the status of the disk array will be marked as critical, and BIOS will
prompt the user to duplicate the RAID 1 in order to ensure the backup data consist-
ency with the user data.
If user selects Continue to boot, it will enable duplicating the array after
booting into OS.
To Next Page
Loading...
Need help?
General
