3-11
BIOS Setup
Integrated Peripherals
USB Controller
This setting is used to enable/disable the onboard USB host controller. Setting options:
[Disabled], [Enabled].
USB 2.0 Controller
Set to [Enabled] if you need to use any USB 2.0 device in the operating system that
does not support or have any USB 2.0 driver installed, such as DOS and SCO Unix.
Setting options: [Disabled], [Enabled].
USB Keyboard/Mouse Support
Set to [Enabled] if you need to use a USB keyboard/mouse in the operating system
that does not support or does not have any USB driver installed, such as DOS and
SCO Unix. Settings: [Enabled], [Disabled].
Azalia/AC97 Audio Select
This item allows you select Azalia Audio or AC97 Audio Setting options: [Enabled],
[Disabled].
Onboard VIA6410 RAID Mode
The item allows you decide VIA6410 chipset to support IDE or IDE RAID. Setting
options: [IDE], [RAID], [Disabled].
OnBoard VIA6307(IEEE1394)
This setting is used to enable/disable the onboard VIA 1394 controller. Setting options:
[Enabled], [Disabled].
Onboard Intel LAN
The item enables or disables the onboard LAN device. Setting options: [Enabled],
[Disabled].