1-2
MS-7176 ATX Mainboard
Mainboard Specifications
CPU
† Supports Intel
®
Pentium 4/ Celeron D Prescott LGA775 processors (DualCore
and CederMill) in LGA775 package.
† Supports 2004 Performance FMB CPU VR Design.
† Supports 3/4 pin CPU Fan Pin-Header with Fan Speed Control.
† Supports up to Pentium 4 3XX, 5XX, 6XX & P4EE (Intel Pentium 4 Processor
with HT Technology Extreme Edition).
(For the latest information about CPU, please visit http://www.msi.com.tw/program/
products/mainboard/mbd/pro_mbd_cpu_support.php)
Chipset
† Intel
®
945G chipset
- Supports FSB 533/ 800/1066MHz.
- Supports PCI Express x16 graphics interface.
- Supports DDR2 400/533/667/800
- Integrated graphics controller.
† Intel
®
ICH7/ICH7R chipset (optional)
- Hi-Speed USB (USB2.0) controller, 480Mb/sec, up to 8 ports.
- 4 SATAII ports with transfer rate up to 3Gb/s.
- 1 channel Ultra ATA 100 bus Master IDE controller.
- PCI Master v2.3, I/O APIC.
- ACPI 2.0 Compliant.
- Serial ATA RAID 0, RAID 1, RAID 10, RAID 5 and Matrix RAID. (for ICH7R)
- Integrated AHCI controller.
Main Memory
† Supports four unbuffered DIMM of 1.8 Volt DDR2 SDRAM
† Supports up to 4GB memory size.
† Supports Dual channel DDR memory architecture.
† Supports DDR2 533/667 memory interface.
(For the updated supporting memory modules, please visit http://www.msi.com.tw/
program/products/mainboard/mbd/pro_mbd_trp_list.php.)
Slots
† One PCI Express x16 slot.
† Two PCI Express x1 slots.
† Three 32-bit v2.3 Master PCI bus slots (support 3.3v/5v PCI bus interface).
On-Board IDE
† One Ultra DMA 66/100 IDE controllers integrated in ICH7/ICH7R.
- Supports PIO, Bus Master operation modes.